Baumatic BT2385SS, Instruction Manual

Page: 27 / 36

Instructions for use, installation and connection
27
Replacement of parts
The oven light bulb casing is under
tension. Danger of electric shock!
Before replacing the oven bulb switch off the
cooker and cut it from mains by removing
the mains power fuse or disconnect the
protective device.
Remember that the bulb is regarded as
consumption material and is not covered by
the warranty.
Other accessories
Oven grid, biscuit tray, etc. may be ordered
from the service center. When ordering
please quote the code and the type or
model of the appliance.
Hotplate control knobs are removed by
pulling them outwards and replaced by
pushing the new ones back in place.
Oven light bulb
The bulb for
replacement
should meet the
following
specifications:
E 14, 230 V, 15 W,
300°C.
Unscrew the glass
cover by turning it
counter clockwise,
and replace the
bulb. Screw the
glass cover back in
place.
The side light bulb
glass cover may be
removed by
inserting the
screwdriver into the
slot and pull in the
direction of the
arrow (see Fig.).
Remember that
the bulb is
regarded as
consumption
material and is
not covered by
the warranty.