10
INCIDENT
CAUSE
SOLUTION
The control dial is in position
and the door is still loc-
ked.
The oven has not cooled down
to the safe temperature.
Wait until the temperature
lowers and pilot light
turns
off.
The control dial is in position
, the oven is cold and the
door is still locked.
You have not followed the
instructions to cancel the
operation correctly.
1. Turn the control dial to
position
and wait for 1
minute.
2. Turn the control dial to
position
and wait for 1
minute.
3. Turn the control dial to
position
again and wait
until pilot light
turns off.
I have turned the control dial
to position
. The pilot light
is lit up, the P symbol is
flashing on the timer display
and there is a beep every 5
seconds.
You have not selected one of
the programmes (P1, P2 or
P3).
Press + or – to choose one of
the programmes (P1, P2 or P3)
to start the pyrolytic cycle.
