background image

 

6

Child safety 
 

o

 

Packaging material should be kept away from 
children. 

 

o

 

Children should not be allowed to touch the 
controls or play with the appliance. 

 
General safety 

 

o

 

Do not pull on the power supply cable to remove the plug from 
your mains supply socket. 

 

o

 

Do not pull out or insert the plug with wet hands. 

 

o

 

Do not attempt to use your appliance outdoors or 
any place where it is likely to come into contact 
with the elements. 

 

o

 

Before cleaning the appliance or performing 
maintenance work, ensure that the appliance has been 
disconnected from your mains supply. 

 

o

 

Never allow the back coils of the appliance to come into contact 
with the wall surface. 

 

o

 

Always ensure that the location where you are installing your 
appliance is free of stored items such as papers and other 
flammable materials. 

 

o

 

Never block the ventilation openings of the appliance, either on 
the inside or its exterior.  

 

o

 

It is vital to keep your appliance well ventilated, 
so that there is proper air flow between the 
bottom of the unit and the plinth/kick plate 
which it is sitting on. 

 
 

o

 

Do not place electrical devices inside of the appliance, such as 
mixers and electric ice cream makers. 

 
Service 
 
You should not attempt to repair the appliance 
yourself, as this could cause injury or a more serious 
malfunction. If you require a service call then please 
contact the Baumatic Service Department. 

 
 

Summary of Contents for BRCI7030





































Reviews: