Baumatic BMO6S, User Manual, Page: 23 / 28

6
To deactivate the child lock, touch or until key
symbol disappears. Exception: A buzzer tone during child
lock can be cancelled touching any button.
USER PROGRAMMABLE OPTIONS:
1-Time of day display 12h / 24h
Factory setting is 24 h display. Touching for 5
seconds, a double beep tone will be heard, the display
mode toggles to 12 h mode (am / pm indication) Doing
this again will toggle back to 24 h
2-Touch tones
As a factory setting, touching buttons are accompanied
by beep tones. Touching the
button for 5 seconds,
a double beep tone will be heard and nt , which stays
for no tone, will appear on the screen. Now, no touch
tones will be produced any more. Doing the same until
bt appears on the screen, which stays for button tone,
brings you back to touch tones.
3-Screen Brightness Adjustment:
Touching button for 1 second, until you hear a
double beep tone, brings you into the display brightness
mode. Display shows br 0x (x = 1 to 8). Now every
consecutive touch of the same button will reduce the
brightness. There are 8 levels, thereafter the brightness
starts to increase upon every touch. The same effect is
also seen by holding this button touched. In 5 seconds
after releasing the button, the brightness level is stored.
Factory setting is maximum brightness.
4-Buzzer Tone Selection:
Touch button for 1 second, until you hear a double
beep tone. Upon every touch of this button within 5
seconds, you will hear a different tone. There are 3
different tones available. The tone last heard will be
stored in 5 seconds.
Note: Programmed options are nonvolatile. They will not
be erased upon a power interrupt.