Baumatic BMO6S, User Manual, Page: 19 / 28

2
Use of the Oven
Manual use of the oven
1 Turn the timing switch to the left to the position .
2 Select a temperature and a cooking function.
3 Set the controls in position to switch off the oven.
Using the timer switch
Allows cooking during a pre-established time. To do this,
1 Select the function and the cooking temperature.
2 Turn the timer control clockwise as far as the position
“120 minutes” and then turn it backwards to the
required cooking period.
3 When the time has finished, there will be an acoustic
signal and the oven will stop heating.
4 Set the controls to the position to switch off the oven.
3 When the time has finished, there will be an acoustic
signal and the oven will stop heating.
4 Set the controls to the position to switch off the oven.
Setting the time on the clock
On connecting the oven, you will notice that 12:00 appears
on the clock and that a light begins to flash above the
symbol. Pressing the “+” and “–“ buttons the correct time
can be set on the clock, which is subsequently stored and
the flashing light goes out.
Manual use
After setting the correct time, the oven is ready for use.
Select a temperature and a cooking function. To switch
off the oven, set the controls to the position .
Functions of the Electronic Clock Programmer
Warning function:
This function generates a
warning tone at a specified time.
Cooking time: This function allows to programme the
oven to cook for a specified time, after which it will switch
itself off.
End of cooking time: This function allows to establish
the exact hour, after which the oven will switch itself off.
Duration and automatic stop: This function is used to
control the duration and the time at which the oven will
turn itself off. This function allows the oven to start and stop
automatically.
Warning function
1 Press the MODE button until the signal above the symbol
begins to flash.
2 Choose the time when you want the alarm to sound,
pressing the “+” or “–“ buttons.
3 Subsequently, the light will remain on indicating that the
alarm is programmed.
4 At the end of the programmed time, an alarm will sound
and the light will begin to flash.
5 Press any button to turn off the alarm and the screen
shows the current time again.
Programming the cooking time
1 Press the MODE button until the indicator above the
symbol begins to flash.
2 Select the length of time, pressing the “+” or “–“ buttons.
3 Subsequently, the indicator that was flashing will
light, indicating that the oven will switch itself off
automatically.
4 The clock will then show the current time.
5 Select a temperature and cooking function.
6 When the set time has elapsed, the oven will disconnect,
an alarm will sound and the indicator will begin to flash.
7 Press any button to switch off the alarm, reconnecting
the oven.
8 Set the controls in the position to switch off the oven.
Programming the end of cooking time for the
oven
1 Press the MODE button until the indicator above the
symbol begins to flash.
2 Select the time that cooking is to finish, pressing the
“+” or “–“ buttons.
3 Subsequently, the indicator that was flashing is
lit, indicating that the oven will switch itself off
automatically.
4 The clock will then show the current time.
5 Select a temperature and a cooking function.
6 When the programmed time is reached, the oven will
disconnect, an alarm will sound and the indicator will
begin to flash.
7 Press any button to switch off the alarm and the oven
will reconnect.
8 Set the controls to the position to switch off the oven.
This function may be used even though you are already
cooking in your oven. To do so, follow the instructions
given except Nº 5.
Programming the duration and automatic
stop
1 Press the MODE button until the indicator above the
symbol begins to flash.
2 Select the length of cooking time pressing the “+” or
“–“ buttons.
3 Subsequently, the indicator that was flashing will
remain lit.
4 Press the mode button until the indicator above the
symbol begins to flash.
5 Select the time that cooking should finish pressing the
“+” or “–“ buttons.
6 Subsequently, the indicator that was flashing will
remain lit.
7 Select a function and cooking temperature.
8 The oven will remain disconnected with the indicators
above the and symbols lit. Your oven is
programmed.
9 When the time to begin cooking is reached, the oven
will switch itself on and will continue cooking during
the programmed time.
10 When the programmed finishing time is reached, the
oven will disconnect, an alarm will sound and the light
above the
symbol will begin to flash.
11 Press any button to switch off the alarm and the oven
will reconnect.
12 Set the controls to the position to switch of the oven.