Baumatic BHI655, Instruction Manual

Page: 28 / 36

o
Carefully lower the cooktop into the aperture hole that you have cut
out.
o
There are holes on the base of the cooktop that you can fix the
brackets to.
You should place the bracket on the underneath of the cooktop, in a
position that is appropriate for the aperture that you have cut out.
Using the screws provided, fix the bracket to the cooktop. These
screws MUST be securely tightened.
Electrical connection
This appliance must be installed by a qualified
person in accordance with the latest edition of the
AS/NZS3000:2007 Regulations and in compliance
with the manufacturer's instructions.
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o
This appliance must be wired into a 32A double pole switched
fused isolator circuit, having 3 mm contact separation and placed
in an easily accessible position adjacent to the appliance. It
should not be located above the appliance and no more than
1.25m away from it.
o
The switch must still be accessible even when your cooktop is
located in its operating position.
o
Cable type: H05 RRF 3 core x 6 mm² (not supplied).
27