Baumatic BHI615 Instruction Manual Download | Manualshive

Page: 31 / 36

background image

IMPORTANT: If your appliance appears not to be
operating correctly, then you should disconnect it
from your mains supply and then contact
Baumatic Customer Care on telephone number
(0118) 933 6911.

DO NOT ATTEMPT TO REPAIR THE APPLIANCE
YOURSELF.

Please note that if an engineer is asked to attend whilst the product is
under guarantee and finds that the problem is not the result of an
appliance fault, then you may be liable for the cost of the call out
charge.

The appliance must be accessible for the engineer to perform
any necessary repair. If your appliance is installed in such a
way that an engineer is concerned that damage will be caused
to the appliance or your kitchen, then he will not complete a
repair.

This includes situations where appliances have been tiled in,
sealed in with sealant, have wooden obstructions placed in
front of the appliance, like plinths. Or any installation other
than the one specified by Baumatic Ltd. has been completed.

Please refer to the conditions of guarantee that appear on the
warranty card that you receive with the appliance.

IMPORTANT: Baumatic Ltd. operates a policy of continuous
improvement and reserves the right to adjust and modify its
products without prior notification.

31

«
...
29
30
31
32
33
...
»

Summary of Contents for BHI615





































Reviews:

No comments

Related manuals for BHI615

Brand: Concept2 Pages: 88

Brand: Robam Pages: 13

Brand: STOVES Pages: 24

Brand: hestan Pages: 28

Brand: D'KOCINA Pages: 42

Brand: Gaggenau Pages: 16

Brand: Gorenje Plus Pages: 44

Double Booster VI-KI1-DB

Brand: vivandio Pages: 52

4717ASPIRACENTRALE

Brand: Eico Pages: 100

Brand: Siemens Pages: 8

Brand: Siemens Pages: 12

Brand: Siemens Pages: 12

Brand: Siemens Pages: 12

Brand: Siemens Pages: 12

EA6 GMA1 Series

Brand: Siemens Pages: 12

Brand: Siemens Pages: 20

Brand: Siemens Pages: 12

Brand: Siemens Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands