background image

 

18

o

 

Soak them for about ten minutes in hot water and a little 
detergent.  

 

o

 

After cleaning and washing them, wipe and dry them carefully.  

 

o

 

Before placing the burners back on the hob top, make sure that 
the gas jet is not blocked.
 

 

o

 

IMPORTANT: Make sure that you reassemble the burners in the 
original way. 

 
Maintaining the enamelled pan stands  
(BHG300.5SS / BHG604.5SS/W)
 
 

o

 

IMPORTANT:  Make sure that the hob surface and pan stands 
have cooled before you attempt to touch them. 

 

o

 

Wipe the pan stands over with a soft, damp cloth that has been 
put into warm soapy water. The cloth should be wrung out after 
being taken out of the soapy water. 

 

o

 

Using a paper towel, thoroughly dry the pan stands. 

 
Maintaining the cast iron pan stands 
(BHG610.5SS / BHG710.5SS / BHG900.5SS) 
 

 

o

 

IMPORTANT:  Make sure that the hob surface and pan stands 
have cooled before you attempt to touch them. 

 

o

 

Wipe the pan stands over with a soft, damp cloth that has been 
put into warm soapy water. The cloth should be wrung out after 
being taken out of the soapy water. 

 

o

 

Using a paper towel, thoroughly dry the pan stands. 

 

o

 

To maintain the appearance of the cast iron pan stands, we 
would recommend that you rub a small amount of olive oil into 
the pan stands, after you have finished cleaning them. 

 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for BHG300.5SS





































Reviews: