Installing the appliance
o
Cut a hole in the worktop that corresponds with the drawings
shown above.
o
IMPORTANT:
You must have a gap of at least 25 mm between
the underneath of the appliance and any surface that is below it,
it must also have the additional 20 mm gap shown in the
drawing above.
o
Carefully turn the hob upside down and place it on a cushioned
mat.
16
Summary of Contents for BHC601
Page 1: ...1 BHC601 60cm 4 Radiant zone frameless ceramic hob...
Page 23: ...23...
Page 24: ...24...
