Baumatic BHC310-ANZ, Instruction Manual

Page: 25 / 32

25
le on the outer edge of the
bracket but do not fully tighten.
e cut out.
orrectly positioned, tighten the long screws to
fix the hob securely in the aperture hole. These screws MUST
e
Electrical connection
OUR HOB IS INTENDED FOR FITTED AND
o
Cable type: H05 RRF 3 core x 1.50 mm³ (Type RR-F <HAR>
is supplied with this product.
ked on the rating plate corresponds with your mains
supply voltage.
o
We recommend that the appliance is connected by a qualified
o
The hob must be wired into a 15A outlet and placed in an easily
spur outlet
ust still be accessible even when your hob is located in its
o
i red as follows:
o
As the colours of the wires in the appliance’s mains lead may not
proceed as follows:
o
Place the long screw into the fixing ho
o
Carefully turn the hob back over and then gently lower it into the
aperture hole that you hav
o
When the hob is c
be s curely tightened.
Y
PERMANENT INSTALLATION.
marked).
o
The mains cable
o
Before connecting the appliance, make sure that the supply
voltage mar
electrician.
o
WARNING: THIS APPLIANCE MUST BE EARTHED.
accessible position adjacent to the appliance. The
m
housing.
The wiring in the mains lead s colou
Brown Live
Blue Neutral
Green and yellow Earth
correspond with the coloured markings identifying the terminals
in your spur box, please