Baumatic BFWE1420W User Manual Download Page 22

9

 

To cancel the delay start feature, you should press and hold 
down the Start/Stop button until the LCD display changes back 
to the screen that you see when originally selecting a wash 
program. You can then select another wash cycle that will start 
immediately or you can set up the delay start feature to operate 
again. 

 

o

 

After a delay start has been cancelled, the door lock light will 
remain off for one minute; this indicates that the door is still 
locked.  

 

9

 

When the LOCK DOOR light switches on, it will then be possibly 
for you to open the porthole door. 

 

Spin selection button 
 

Your washing machine will automatically select an appropriate spin 
speed for each wash program. However it is possible to alter the 
spin speed that it automatically selects, by pressing the spin 
selection button. 
 

9

 

Turn the wash program selection knob to the wash program 
that you want to use. 

 

9

 

Press the spin reduction button and continue to press it until 
the LCD display shows the spin speed that you require. 

 

o

 

On wash programs where 1000 rpm is automatically selected, 
the speed in the LCD display will change as follows; 

1000-900-800-700-600-500-400-100-

 - 

.-

1400-1300-1200-1100 

 

o

 

On wash programs where 600 rpm is automatically selected, 
the speed in the LCD display will change as follows; 

600-500-400-100-

 - 

 

9

 

If you continue to press the spin reduction button after 
100rpm appears. Then 

 will appear in the display. 

This symbol means that the appliance will not spin and it will 
move to the drain program after the rinses have completed. 

9

 

If you press the spin reduction button again, then 

will 

appear in the LCD display. This means that the clothes will be 
held in water, until you select a spin or drain program. 

 

YOU MUST DO THIS BEFORE OPENING THE DOOR OF 
THE APPLIANCE.

 

 

 

22

Summary of Contents for BFWE1420W





































Reviews: