Cleaning the spray arms
The spray arms should be cleaned regularly, to prevent hard water
deposits from clogging the spray arm jets and bearings.
o
To remove the spray arm, unscrew the nut and take out the
washer that sits on top of the spray arm.
o
Gently pull upwards to remove the spray arm.
o
Wash the spray arm in warm, soapy water and use a soft brush
to clean the jets.
o
Rinse the spray arm thoroughly and then reassemble the spray
arm back in its original position.
Cleaning the control panel
IMPORTANT: Do not use any abrasive cleaner or household polish on
either the control panel or operating parts.
9
Wipe over the control panel using a brand new damp cloth
with warm water.
Cleaning the door
o
To clean the edge around the outside of the door, you should use
a soft, damp cloth only.
o
To prevent water from penetrating the door lock or electrical
components, DO NOT use a spray cleaner of any kind.
o
DO NOT use any abrasive cleaner or scouring pads on the inner
or outer surfaces, as they may cause damage to the surfaces.
26
Downloaded from
www.Manualslib.com
manuals search engine