The 3 in 1 wash program
IMPORTANT: Before using the 3 in 1 wash program, make
sure that you have followed the “3 in 1 tablets before first
use” section.
Make sure that the water softener has not got any salt in it.
If there is still salt in it, then turn the water softener to its
lowest setting.
Make sure that the rinse aid dispenser has been set so it
does not dispense rinse aid.
THIS WASH PROGRAM MUST BE SELECTED IF YOU ARE USING 3
IN 1 DETERGENT. IF YOU USE ANY OTHER WASH PROGRAM
WITH 3 IN 1 TABLETS, THEN YOU MAY GET POOR WASH
RESULTS.
o
Hang the 3 in 1 tablet container on the underneath of the upper
basket, in the position shown on the diagram.
o
Check that the 3 in 1 tablet container is not going to foul the
upper spray arm, by rotating the spray arm around slowly. If it
does hit the 3 in 1 tablet container, you should move the
container.
o
Put a 3 in 1 tablet inside the 3 in 1 tablet container. Load the
appliance as normal and select the 3 in 1 wash program.
If your wash results are poor, then we would recommend
that you use a dishwasher detergent that doesn’t have
rinse aid and salt included in the tablet. Fill the appliance
with rinse aid and dishwasher salt, then set them so they
dispense the appropriate amount for your water hardness.
22
Downloaded from
www.Manualslib.com
manuals search engine