I
23
nstalling the appliance
o
Cut a hole in the worktop that corresponds with the drawings
shown above.
n
of the appliance and any surface that is below it.
o
mat.
nce.
s.
o
Do not leave a gap in the sealing agent or overlap the thickness.
o
IMPORTANT: Do not use a silicon sealant to seal the appliance
from the aperture in future, particularly if it needs to be
o
IMPORTANT: You must have a gap of at least 25 mm betwee
the underneath
Carefully turn the hob upside down and place it on a cushioned
o
Apply the sealing strip provided around the edge of the
applia
o
The protective covering must be removed from both side
against the aperture. This will make it difficult to remove the hob
serviced.
Summary of Contents for BF18SS
Page 1: ...1 BF18SS 77cm touch control ceramic hob...
Page 31: ...31...
