Baumatic BE60GL, Instruction Manual, Page: 16 / 32

16
o
Ensure that all electrical connections are carried out by a suitably
qualified person.
o
Before commencing installation of the cooker hood the grease
filter should be removed.
o
Check inside the product and ensure that there is no transit
packaging or any other materials, such as packets of screws,
guarantees etc. These should be removed and kept for future
use.
o
If possible, disconnect and move freestanding or slot-in cookers
from their position, to provide easier access to the rear wall and
ceiling. If this is not possible, then a thick, protective covering
should be placed over the worktop, hob top or cooker. This will
help to protect these surfaces from damage and debris.
o
Select a flat surface for assembling the cooker hood. Cover that
surface with a protective covering and place all cooker hood
parts and fittings on it.
o
Rawl plugs are provided to secure the hood to most types of
walls and ceilings. However a qualified technician must verify the
suitability of the materials, in accordance with the type of wall
and ceiling. The wall and ceiling must be strong enough to take
the weight of the hood.
o
Do not tile, grout or silicone this appliance to the wall. This
appliance is designed to be surface mounted only.