o
Unscrew the six fixing screws (B) which lock the side profiles
and remove it.
o
Remove the hob by unscrewing the rear fixing screws (B) which
lock the hob at the supports (C).
o
Unscrew the nuts (E) of the gas
aluminium pipes and pull out the
thermocouple quick connectors (F).
o
Unscrew the screws (D) which lock the
crosspieces.
o
Unscrew the screws (G) which unite the
bridles of the taps to the front frame.
o
Slip the ramp towards the back part and
unscrew the screws (G) in order to free
the taps.
o
Change the seal each time a tap or a
thermostat is replaced. This will ensure
perfect retention between the tap or a
thermostat and part.
o
Reassemble all the parts following the
same procedure but in the reverse
order.
My appliance isn’t working correctly
o
The oven isn’t coming on.
*
Check that the oven is in manual operation mode.
*
Check that you have selected a cooking function and a cooking
temperature.
o
There appears to be no power to the oven and grill.
*
Check that the appliance has been connected to the electrical
mains supply correctly.
*
Check that the mains fuses are in working order.
38
