Baumatic BCG620SS, Instruction Manual

Page: 21 / 40

21
o
We would recommend that an appropriate stainless steel cleaner
and polish is regularly used on the stainless steel surfaces of this
appliance (BCG620SS only).
o
If you use any form of oven cleaner on your appliance, then you
must check with the manufacturer of the cleaner that it is
suitable for use on your appliance.
o
Any damage that is caused to the appliance by a cleaning
product will not be fixed by Baumatic free of charge, even
if the appliance is within the guarantee period.
Cleaning the gas hob top
o
Remove the dirty pan supports from the hob and place in warm
soapy water for some time. Then wash and dry before replacing.
After each use
o
Wipe the appliance over with a damp cloth and a little washing
up liquid.
o
Dry the appliance by rubbing the surface with a clean cloth.
Cleaning the burners
o
Gas burners should be cleaned regularly and after each spillage
to remove cooking residues and dirt.
o
To clean the burners,
remove the caps and rings
and place them separately in
warm soapy water. After
cleaning them, check that
the burner ports are clear.
o
The body near the nozzle
should always be clean. Dirt
accumulating around the
nozzle may clog it, as a
result of which the burner
will not light or will light only
with a small flame. To clean
the nozzle use a brush
soaked in solvent.
o
Dry all the elements of the burner carefully as wet elements may
not light properly. Assemble the clean and dry burners carrying
out the disassembly steps in reverse order.