IF AN ENGINEER ATTENDS DURING THE GUARANTEE
PERIOD AND FINDS THAT A FAULT HAS BEEN CAUSED
BY AN ITEM ON THE ERROR CODE LIST, WHICH COULD
HAVE BEEN CLEARED BY THE CUSTOMER. THEN YOU
MAY BE LIABLE FOR THE COST OF THE SERVICE CALL.
General troubleshooting
Problem Possible
solutions
The display does not come on.
o
Check the plug is inserted correctly to
connect to the electricity supply.
o
Check the correct programme has been
selected.
o
Check the fuse in the house has not
blown.
The dryer does not start.
o
Check that the START/PAUSE button
has been pressed.
o
Check the door is closed properly.
o
Check the programme has been set
correctly.
Water is escaping from the drum.
o
Check that the dryer is level and adjust
the feet if necessary.
o
Clean the air condenser and door seals.
The door opens by itself.
o
Press the door closed until it clicks into
position.
o
Check the clothes do not exceed the
load capacity and fit easily into the
drum.
Humidity in the room has increased
significantly.
o
Ensure the room is ventilated
adequately.
o
Clean the cool grille.
o
Ensure that the air condenser has been
inserted.
Clothes are not dried sufficiently or
the drying time was too long.
o
Clean the lint filter and air condenser.
o
Empty the container drawer.
o
Check the water outlet.
o
The positioning of the dryer may be too
restrictive.
o
Clean the moisture sensors.
o
Use a more intense drying programme
or adjust the time of drying.
23
