34
ins supply cable
he mains lead are
oloured in accordance with the
LUE
NEUTRAL
ROWN
LIVE
A) and unscrew (not fully) the screws in the mains
terminal block (L, N, E) which secure the three wires of the
o
Allow sufficient cable length for the cooker to be pulled out for
o
he cable can be looped if necessary, but make sure that is not
er is in position.
the mains supply cable is damaged, then it must be replaced by an
he mains supply cable should be replaced in accordance with the
ocket.
o
Replace the cable with one of the same length and in accordance
o
low” earth wire must be connected to the terminal
arked
Connecting the ma
IMPORTANT
The wires in t
c
following code:
GREEN AND YELLOW EARTH
B
B
o
Open the mains terminal block cover as shown, unscrew the
cable clamp (
mains cable.
o
Fit the cable and refit the cable clamp (A).
cleaning, but do not let it hang closer than 50mm to the floor.
T
kinked or trapped when the cook
Replacing the mains supply cable
If
appropriate replacement.
T
following instructions:
o
Switch the appliance off at the s
o
Open the box of the supply board.
o
Unscrew the clamp (A) fixing the cable.
with the specification given on the previous page.
The “green-yel
m
. It must be about 10 mm longer than the live and
neutral wires.
