1
6
Troubleshooting
IMPORTANT: If your
beverage centre
appears not to be
operating properly, before
contacting Baumatic
Service Care, please refer to the checklist below.
PROBLEM
POSSIBLE CAUSE / MEASURE
Appliance
does not operat
e.
Not plugged in.
T
he appliance
is turned off.
The circuit breaker has tripped or the fuse has blown.
Appliance
is not cold enough
.
Check the temperature control setting.
The door is opened too frequently.
The door is not closed completely.
The door gasket does not seal properly.
T
urn-on and turn-off frequently
.
The room temperature is hotter than normal.
A large amount of contents has been added to the
Appliance.
The door is opened too frequently.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The lighting does not work
.
Not plugged in.
The circuit breaker has tripped or the fuse has
blown.
The lighting is turned off.
Too much vibration
.
Check to assure that the appliance is level.
The
appliance
seems to make too
much noise
The rattling noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds
caused by the flow of refrigerant.
Contraction and expansion of the inside walls may
cause popping and crackling noises.
The appliance is not level.
The door will not close properly.
T
he door is misaligned.
T
he appliance is not level.
The gasket is dirty.
The shelves are out of position.
Display flashes Error message "E1".
Temperature
sensor failure.
Display flashes Error message "E2".
D
efrost sensor
(C
oil
Se
nsor
)
failure.
