background image

 

7

leaning 

 

Cleaning of the hob should be carried out on a regular basis.

 

, it 

should be disconnected from the mains and allowed to cool.

 

using this appliance and when 

following the cleaning procedure.

 

other high pressure 

cleaning equipment to clean the appliance.

 

section of this booklet that refers to 

stallation. 

a result of improper 

use or installation of this appliance. 

eclaration of conformity 

This appliance complies with the following European Directives: 

/128/EEC This appliance is suitable to come in 

004/108/CE Electromagnetic compatibility 

ce 

must be used by a trained person for domestic purposes only. 

o avoid damaging your appliance 

 

The hob surface can be damaged by objects falling onto it. 

f the hob surface can be damaged by knocks from 

cookware. 

bases 

C
 

o

 

o

 

IMPORTANT:  Before attempting to clean the appliance

 

o

 

Great care should be taken whilst 

 

o

 

You should not use a steam jet or any 

 
Installation 

 
This appliance must be correctly installed by a 
suitably qualified person, strictly in accordance 
with the manufacturer’s instructions. Please see 
the specific 
in
 

o

 

Baumatic Ltd. declines any responsibility for injury or 
damage, to person or property, as 

 
D
 

 
-2006/95/CE General regulations / Low tension 
-1935/2004/CE 90
contact with food 
-2
 

o

 

The manufacturer declares that the hob is built using certified 
materials and requires the appliance to be installed in 
accordance with the standards currently in force. This applian

 
T
 

o

 

o

 

The edge o

 

o

 

Cast iron and cast aluminium cookware with damaged 
may scratch the hob surface if they are dragged across it. 

Summary of Contents for B65.5SS

























Reviews: