Baumatic AS6.2, Instruction Manual

Page: 9 / 24

8
Instructions for use
These User Instructions should be retained for future reference and for use by any person who is
perhaps unfamiliar with the appliance.
USING THE HOB
B13 B14 BH14 B15 B16 & BF16
These models have a safety lock feature incorporated into the control panel
This feature is to prevent accidental use of the appliance, This can be done by first pressing the power
On / Off key and then the Lock Key, The lock function can also be applied to a cooking zone when in
use, to maintain a specific heat setting, this is done by selecting the required heat setting of the zone
and then by pressing the lock key it will lock the zone at that required setting. When applying the lock
function an audible bleep is emitted and the LED adjacent to the pad will illuminate. To switch off the
lock function press the Key symbol and again an audible bleep will be emitted and the adjacent LED
will be distinguished. To gain full adjustable heat control the zone must be re-selected.
ALL MODELS
To switch on the appliance press the On / Off pad for 3 seconds, an audible bleep will be emitted and
the adjacent neon light will illuminate. Also a zero illuminates in each power
level display and the adjacent neon indicators flash.
The next input selection must take place within 10 seconds otherwise the hob will switch off again.
You can now select the required cooking zone by pressing the appropriate zone identification key and
then selecting the required heat level using the
+
or
-
keys, The heat levels range from 1 minimum
through to 9 maximum.
Residual Heat Indicator
After use an
“H”
will light in the power level indicator of the zone that has been in use
The residual heat indicator will remain illuminated until the temperature drops below 50
°
C, the
residual heat indicator may not illuminate if during the cooking period the temperature did not reach
50
°
C or above.