CHANNEL
Channel Edit
Channel Scan
Manual Scan
Channel Sorting
Ch.28
Digital Channel
CHANNEL SCAN
DTV Setting (Option)
36
Setting up Digital Television Tuner
Automatic Channel Scan
DTV Initializing......
1. TV
2. SCART1 Video
3. SCART2 Video
4. Video
5. S-Video
6. Component1
7. Component2
8. RGB
9. HDMI
-
. DTV
Input Selection
This feature operates only in the model with a built-in digital broadcast tuner.
Television is not pre tuned and "No Signal" will appear on screen until antenna is connected to DTV aerial
input and Digital Tuner is setup. Please follow the simple setup instructions below.
➤
Selecting the Digital Television Input
1
Press "DTV" button on remote control, button will toggle
between DTV (built in digital Tuner) and component 1,
Component 2.When television is first turned on or DTV is first
selected after turning television on "DTV Initializing" will appear
along with a green bar while television powers up the on board
digital tuner.
or
Press the
TV/AV
( ) button.
■
A menu of all available input sources are displayed.
TV - SCART1 Video - SCART2 Video - Video - S-Video -
Component1 - Component2 - RGB - HDMI - DTV
2
Press the (
/
) button to select
DTV
and press the
OK
button.
3
To return to the previous menu, press the
EXIT
button.
This function will tune and save all available Digital Television channels to the television memory.
☛
Digital Tuner setup is done through a submenu available by pressing the "setup" button on the bottom left
corner of the remote control. Do not press the "menu" key located in the centre of the remote control as this
does not lead to the Digital Tuner setup function
1
Press the
SETUP
button on the bottom row of the remote
control, the Digital Setup menu will appear.
2
Use the (
/
) buttons to highlight the antenna icon (located
in the right column of screen menu).
3
Press the
OK
button on the remote control, "channel edit" will
be highlighted.
4
Press the (
/
) buttons to highlight "Channel Scan" then
press the
OK
button.
5
Channel scanning automatically begins and will take a few
minutes to complete.
☛
For each Television network the same channel will appear more
than once in a numeric ordered group on the channel list
,
these
usually include a Standard Definition (SD) channel
,
High Definition
(HD) channel and other channels used by each network for multi
casting
.
"For ease of use it is recommended that channel edit
function is used to remove any unwanted or repetitious channels"
.
☛
When tuning Digital television stations in built up areas(cities)
often more than one television transmitter is present
.
In this
situation the complete list of channels will appear twice on the
channel list
.
One of the lists will be from the closest transmitter
and will represent the strongest signal for your area
.
For ease of
use it is recommended that "channel edit" function is used to
remove any unwanted or repetitious channels
.