4.6 Attachments
NOTICE
Use only Baumalight approved
attachments.
Attachments can change the stability
and the operating characteristics of the
skidsteer.
The warranty of the skidsteer may
be voided if used with unapproved
attachments.
Connect Attachment
1.
Before connecting the attachment, verify that
the mount plates are free of any dirt or debris
and that quick attach pins (A) rotate freely and
are in the disengaged position as shown.
2.
Start engine.
3.
Tilt the mount plate (B) forward.
4.
Position mount plate into the upper lip (C) of
the attachment receiver plate.
A
B
C
5.
Raise the lift arms while tilting back the mount
plate at the same time. The attachment should
be raised enough to clear the ground, and the
mount plate should be tilted all the way back.
6.
Engage park brake and stop engine.
7.
Engage the quick attach pins (A). Verify
that pins are fully seated in the attachment
receiver plate (D). If the pins do not rotate to
the engaged position, the mount plate is not
fully aligned with the holes in the attachment
receiver plate. Check the receiver plate and
clean it if necessary.
A
D
^
WARNING
Prevent death or serious injury.
Attachment could fall off of the skidsteer
if pins are not fully seated through
attachment mount plate.
Verify quick attach pins are fully seated
in the attachment mount plate.
21
