Getting familiar with your new Visio Light
13
7 Getting familiar with your new Visio Light
You have already learned how to position Visio Light on your desk and
you have connected it to power supply and display.
You can slightly tilt the display so that you can comfortably view the
screen. Do not tilt too much; do not try to exceed the stopper position.
Now, switch on Visio Light and use it for the first time.
Power on Visio Light by pushing the power button
on top of the
camera head to the “1” position. The document illumination will be lit
immediately. The monitor will also power on immediately (Power switch
and indicator light in lower right corner of monitor will turn blue).
The Display may show a message like “Invalid video mode”for a few
seconds, then the magnified image will be displayed.
In case the display should not power up automatically, find its power
button directly left to the light. If you cannot see it, move your finger from
the display frame bottom right edge slowly to the left, until you feel the
raised power button. After pressing this button, the blue light will be lit.
From now, Visio Light will switch on and off the monitor automatically.
To power off Visio Light, set the the power switch to the “0” position.
Switch your Visio Light on and off for several times, just to get familiar
with the power up procedure of Visio Light, document illumination and
display. For the next steps, leave it on.
Place a document on your desk right below the camera. Please use
something coloured, like a brochure or magazine with text and images.
Let us try the buttons on the control panel now. We have already
learned, the power on button is on top of the device.
The three button
control panel
is located to the front of the camera
head.
Summary of Contents for 105808H04
Page 1: ...Visio Light User Guide Item number 105808H04 User guide version 1 5 English 06 2017...
Page 2: ......
Page 20: ......
Page 27: ......