Bauknecht TRPC 86531, Instructions For Use Manual

Page: 22 / 51

14
mum 180 minutes (three hours).
Make sure that the
Drying time button
lights
up.
Turn the knob to select the desired drying /
airing time. Confirm it by pressing the knob.
Set dryness level, if needed
If you want to change the dryness level, make
sure that the
Dryness level button
« lights up.
Turn the knob to select the desired dryness
level, afterwards press the knob to confirm.
Select options, if needed
If you want to select additional options,
make sure that the
Options button
« lights
up. The options which are selectable for your
programme are indicated by a lighting arrow.
Turn the knob to select the desired options.
The symbol of the selected option blinks. To
confirm it, press the knob.
Some options / functions can be selected by
directly pressing the button.
Refer to section
OPTIONS, FUNCTIONS
AND INDICATORS
for more information.
INDIVIDUAL MODE
After you have switched on the dryer, you are
not forced to follow the
GUIDED MODE
.
It is up to you which order you choose to set
your programme. To do a setting, first press
the relevant button, then turn the knob to
select, and finally press the knob to confirm.
The variety of options and dryness levels
depends on the programme selected.
Therefore it is recommended to start your
setting with selecting the programme.
5.
START PROGRAMME
Press and hold
Start/Pause
« until the button
lights up solidly; the programme starts.
The duration can be recalculated and
adapted in the course of the programme.
During such phases, an animation occurs on
the display.
6.
CHANGE THE SETTINGS OF A
RUNNING PROGRAMME, IF NEEDED
You can still change some settings after a
programme was started:
• Adjust drying time (only if programme
Drying time
or
Airing
is selected)
• Adjust or cancel
Finish in
, if a delay was
selected and started
• Add or cancel an option, provided the
progress of the programme still allows it.
Press the relevant button. The selected
setting will blink for a few seconds.
While blinking, you can adjust the setting
by turning the knob. If the value or setting
stopped blinking, press the button again.
Press the knob to confirm the modification.
If you do not confirm, the modification will
be confirmed automatically — the modified
setting will stop blinking.
The programme will continue automatically.
To change the settings of a running
programme or delay, you can also:
• press
Start/Pause
to put the running
programme on pause
• change your settings
• press
Start/Pause
again to continue the
programme.
7.
CANCEL A RUNNING PROGRAMME, IF
NEEDED
Press and hold the
On/Off button «
until the
display indicates that the programme is
cancelled.
WARNING
After cancelling a running programme,
quickly remove all items and spread
them out so that the heat is dissipated.
8.
SWITCH OFF THE DRYER AFTER
PROGRAMME END
The display indicates that the cycle has
finished. Press
On/Off button «
to switch off
the dryer. Open the door and take out your
laundry.