16
4. PREHEATING
Some functions have an oven preheating phase: Once
the function has started, the display indicates that the
preheating phase has been activated .
PRE
Once this phase has finished, an audible signal will
sound and the display will indicate that the oven has
reached the set temperature:
At this point, open the door, place the food in the
oven, close the door and start cooking .
Please note: Placing the food in the oven before preheating
has finished may have an adverse effect on the final cooking
result. Opening the door during the preheating phase will
stop pause it.
The cooking time does not include a preheating phase.
You can always change the temperature you want the oven
to reach using the
adjustment knob
.
5. END OF COOKING
An audible signal will sound and the display will
indicate that cooking is complete .
END
Press
to continue cooking in manual mode
(without a programmed cooking time) or turn the
adjustment knob
to extend the cooking time by
setting a new duration .
In both cases, the temperature or the grill level
settings will be retained .
BROWNING
Some functions of the oven enable you to brown
the surface of the food by activating the grill once
cooking is complete .
PRESS
When the display shows the relevant message, if
required press
to start a five-minute browning
cycle .
You can stop the function at any time by turning the
selection knob
to 0 to switch the oven off .
. TIMER
When the oven is switched off, the display can be
used as a timer . To activate this function, make sure
that the oven is switched off and turn the
adjustment
knob
: The icon will flash on the display .
Turn the
adjustment knob
to set the length of time
you require and then press
again to activate the
timer .
An audible signal will sound and the display will
indicate once the timer has finished counting down
the selected time .
Please note: The timer does not activate any of the cooking
cycles.
Use the
adjustment knob
to change the time set on the
timer; press
to switch the timer off at any time.
Once the timer has been activated, you can also select
and activate a function .
Turn the
selection knob
to switch on the oven and
then select the function your require .
Once the function has started, the timer will continue
to count down independently without interfering
with the function itself .
CONVE
To switch off the timer, turn the selection knob to
to stop the function that is currently active and then
press
.
. KEY LOCK
To lock the keypad, press and hold
and
at
the same time for at least five seconds .
Do this again to unlock the keypad .
Please note: This function can also be activated during
cooking. For safety reasons, the oven can be switched off at
any time by turning the
selection knob
to
.
Summary of Contents for IR6 EP8VS2 PT
