7
EN
.
FAST
PREHEATING
Turn the
selection knob
to the symbol to select the
fast preheating function and confirm by pressing the
selection/confirmation button
: the settings are shown
on the display.
If the proposed temperature is that desired, press
the
selection/confirmation button
. To change the
temperature, proceed as described in previous
paragraphs. .
PRE
Once this phase has finished, an audible signal will
sound and the display will indicate that the oven has
reached the set temperature.
At this point, open the door, place the food in the
oven, close the door and start cooking.
At the end of preheating, the oven automatically
selects the conventional function: If you wish to set
a different cooking function, turn the
selection knob
and select the desired function.
Please note: Placing the food in the oven before preheating
has finished may have an adverse effect on the final cooking
result. Opening the door during the preheating phase will
stop pause it.
The cooking time does not include a preheating phase.
You can always change the temperature you want the oven
to reach using the
adjustment knob
.
5.
END OF COOKING
An audible signal will sound and the display will
indicate that cooking is complete.
Press
the
selection/confirmation button
to continue
cooking in manual mode (without a programmed
cooking time) or turn the
adjustment knob
to extend
the cooking time by setting a new duration.
In both cases, the temperature or the grill level
settings will be retained.
BROWNING
Some functions of the oven enable you to brown
the surface of the food by activating the grill once
cooking is complete.
When the display shows the relevant message, if
required press the
selection/confirmation button
to
start a five-minute browning cycle.
You can stop the function at any time by turning the
selection knob to
to switch the oven off.
.
TIMER
When the oven is switched off, the display can be
used as a timer. To activate this function, make sure
that the oven is switched off and turn the
adjustment
knob
: The icon will flash on the display.
Turn the
adjustment knob
to set the length of time
you require and then press the
selection/confirmation
button
to activate the timer. An audible signal will
sound and the display will indicate once the timer has
finished counting down the selected time.
Please note: The timer does not activate any of the cooking
cycles. Use the
adjustment knob
to change the time set on
the timer; turn the
selection knob
to
to switch the timer off
at any time.
COOKTOP OPERATION
(see the instructions supplied with the cooktop).
The oven control panel features 4 adjustable knobs
for cooktop operation.
The cooktop control knobs are marked with a
numerical scale corresponding to different power
settings, and a series of function symbols.
Please note: The multizone function can only be switched on
for the double and triple hotplates of the cooktop.
• Turn the control knob of the relevant hotplate
clockwise to the desired power setting.
