background image

15

Switching on and adjusting cooking zones

After switching on the hob and positioning the pot on the 
chosen cooking zone, adjust the heat setting using the 
. When switched on, the display shows level 5. 
Each cooking zone has different heat settings that can be 
adjusted using the b/-, which go from “1”: min. 
heat setting to “9”: max. heat setting. Some cooking zones 
have a fast boil function (Booster), shown on the display 
with the letter “P”.

Fast boil function (Booster)

This function, only present on some cooking zones, makes 
it possible to exploit the hob's maximum power (for 
example to bring water to the boil very quickly). To select 
this function, press the button “+” until “P” appears on the 
display or, after switching the hob on, press the “-” button 
for the selected cooking zone. In this case too, “P” appears 
on the display. After 10 minutes' use of the booster 
function, the appliance automatically sets the zone to 
level 9.

Switching off cooking zones

Select the cooking zone to be switched off by pressing the 
“+” or “-” key (a dot lights up at the bottom right hand 
side of the heat setting indicator).
Press the key “-” to set the level to “0”.
The cooking zone can also be switched off by pressing keys 
“+” and “-” at the same time. The cooking zone switches 
off and the residual heat indicator “H” lights up 

Child safety

This function locks the hob controls to prevent accidental 
switching on by children. To activate the child safety 
function, switch on the hob then press and hold the 
button

 for three seconds: an acoustic signal and a 

luminous indicator under the key symbol signal activation. 
The control panel is locked with the exception of the OFF 
function. To unlock the controls, repeat the child safety 
activation procedure. The illuminated dot switches off and 
the hob is active again.

The presence of cleaning water, liquid spilled 
from pots or any objects resting on the button 
below the symbol can accidentally activate or 
deactivate the child safety function. 

Child guard accessory AMH 122

This accessory can be obtained from the After-sales 
Service under Part N° 481931018436

Timer

The timer can be used to set a max. 
cooking time of 99 minutes (1 hour and 
39 minutes) for one cooking zone only. 
Select the cooking zone to be used with 
the timer (an illuminated dot appears to 

the bottom right hand side of the heat setting indicator on 
the display), then set the desired cooking time using the 
buttons “+” and -“-” of the timer function (see figure 
above). A few seconds after the button is pressed, the 
timer begins the countdown (the luminous dot of the 
selected cooking zone starts flashing). Once the set time 
has elapsed, an acoustic signal sounds and the cooking zone 
switches off automatically.

To deactivate the timer, press the button “-” until the 
display shows “0:0” or press the buttons “+” and “-” of the 
timer at the same time.

Important!

 The timer function can only be 

used with one cooking zone at a time.

Minute minder

The minute minder can only be used when the hob is not 
in use and allows a maximum setting of 99 min.
Press the button “+” below the timer indicators: the 
display shows the minutes for setting.
Select the time desired using the b and -.
After a few seconds the minute minder starts to count 
down. Once the set time has elapsed an acoustic signal 
sounds.

Important!

 The minute minder function can 

only be used when the hob is switched off; if it is 
then switched on, the minute minder countdown 
is automatically cancelled.

Control panel warnings.

Residual heat indicator.

The hob is fitted with a residual heat indicator for 
each cooking zone. These indicators alert the user 
when cooking zones are still hot.

If the display shows

, the cooking zone is still hot. 

If the residual heat indicator of a given cooking zone is lit, 
that zone can be used, for example, to keep a dish warm 
or to melt butter.
When the cooking zone cools down, the display switches 
off.

Incorrect or missing pot indicator.

The hob features an automatic pot detection 
system for all cooking zones. If no pot is detected, 
the display with the cooking zone power level 
indicator flashes. Make sure the pot is correctly 

positioned and that it has the characteristics given in the 
section “Before use”.

Button -

Heat setting indicator

Selected cooking zone 
indicator

Cooking zone 
positioning

41902022GB.fm  Page 15  Monday, June 23, 2008  12:39 PM

Summary of Contents for ETI 6646











Reviews: