The hob is fitted with a residual heat indicator for each cooking zone. These indicators alert the user when
cooking zones are still hot.
If the display shows , the cooking zone is still hot. If the residual heat indicator of a given cooking zone is
lit, that zone can be used, for example, to keep a dish warm or to melt butter.
When the cooking zone cools down, the display switches off
FAST BOIL FUNCTION (BOOSTER)
This function, only present on some cooking zones, makes it possible to exploit the hob's maximum power (for
example to bring water to the boil very quickly). To select this function, press the button “+” until “P” appears on
the display or, after switching the hob on, press the “-” button for the selected cooking zone. In this case too, “P”
appears on the display. After 10 minutes' use of the booster function, the appliance automatically sets the zone to
level 9.
MINUTE MINDER
The minute minder can only be used when the hob is not in use and allows a maximum setting of 99 min. Press the
button “+” below the timer indicators: the display shows the minutes for setting.
Select the time desired using the b and -. After a few seconds the minute minder starts to count down.
Once the set time has elapsed an acoustic signal sounds.
RESIDUAL HEAT INDICATOR
The hob features an automatic pot detection system for all cooking zones. If no pot is detected, the
display with the cooking zone power level indicator flashes. Make sure the pot is correctly positioned
and that it has the characteristics given in the section “Before use”.
INCORRECT OR MISSING POT INDICATOR
Important! The minute minder function can only be used when the hob is switched off; if it is then switched
on, the minute minder countdown is automatically cancelled.
3
CONTROL PANEL INDICATORS