94
INSTALLATION
Assembly
A) If the worktop is made of wood
, use the appropriate
brackets, spring clips and screws provided.
•
Position the 4 clips (
A
), if not already fitted, around the hob
frame, in the slots provided, see Fig. 1
•
Measure the centre of the vertical sides of the cut-out as
shown in Fig. 2.
•
Position the centre of the brackets (
C
) on the centre of the
side previously identified.
•
The upper edge of the brackets must be flush with the
worktop surface.
•
Secure by means of the 4 screws (
B
) provided, using the
pre-drilled holes.
•
Insert the hob into the pre-prepared hole ensuring that the
clips (
A
) lodge into the bracket slots provided
(
C
Fig. 4 and 5).
B) If the worktop is made of marble, ceramic, stone,
plastic materials, etc.,
order the installation kit, code
4812 310 19277 from an authorized after-sales service.
B
Fig. 2
Fig. 1
A
Fig. 3
C
Fig. 4
Fig. 5
A
41902033GB.fm Page 94 Monday, October 11, 2010 11:22 AM