BAUKER PPS200G, Original Instruction Manual

Page: 12 / 16

EN-12
MAINTENANCE
Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. Your
power tool requires no additional lubrication or maintenance. There are no user serviceable parts in
your power tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a
dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all
working controls free of dust. Occasionally you may see sparks through the ventilation slots. This is
normal and will not damage your power tool. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
TROUBLESHOOTING
1. If your sander will not operate, check the power at the mains plug.
2. If the sander does not abrade surface, check the sanding paper. If the sanding paper have been
worn, replace the new paper and try again. The paper must be kept in a dry place; If it is allowed
to become damp, the abrasive particles will lose their adhesion to the backing paper and will not
abrade.
3. If the sander dose not move smoothly, The sanding paper may be loose, damaged or wrinkled.
Replace and try again.
4. If a fault can not be rectified return the sander to an authorized dealer for repair.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority or retailer for recycling advice.