EN-4
operate the tool when you are tired.
20. Check damaged parts
- Before further use of tool, it should be carefully checked to
determine that it will operate properly and perform its intended
function.
- Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting and any other conditions that may
affect its operation.
- A guard or other part that is damaged should be properly
repaired or replaced by an authorized service centre unless
otherwise indicated in this instruction manual.
- Have defective switches replaced by an authorized service
centre.
- Do not use the tool if the switch does not turn it on and off.
21. Warning
- The use of any accessory or attachment other than one
recommended in this instruction manual may present a risk of
personal injury.
22. Have your tool repaired by a qualified person
- This electric tool complies with the relevant safety rules.
Repairs should only be carried out by qualified persons using
original spare parts, otherwise this may result in considerable
danger to the user.
23. If the replacement of the supply cord is necessary, this has to
be done by the manufacturer or his agent in order to avoid a
safety hazard.
Mitre saw safety instruction
Safety precautions
- do not use saw blades which are damaged or deformed;
- replace the table insert when worn;
- use only saw blades recommended by the manufacturer which
conform to EN 847-1;
- do not use saw blades manufactured from high speed steel;
- wear suitable personal protective equipment when necessary,
this could include:
- hearing protection to reduce the risk of induced hearing loss;
- eye protection when using the tool.
-
respiratory protection to reduce the risk of inhalation of harmful dust.
- gloves for handling saw blades (saw blades shall be carried in
