6
AFTER SALES SUPPORT
800-372-5715
USA
Bluetooth
®
Headphones
.
Charging the battery
Before first use, it is recommended you charge your Bluetooth Headphones for
a minimum of 1 hour.
1. Insert the small end of the included USB
cable into the Micro USB connector on the
headphones right ear pad.
2. Connect the other end of the charging cable
to a USB port on your PC or laptop
3. The LED light will show a solid red color to
indicate charging is active
4. The light will turn off when fully charged
NOTE:
• Charge only with 5V DC 500mA input.
• Use only the original USB charging cable to avoid any damage.
• When the LED flashes red, the battery is low, charge the headphones.
Power On/Off
To Turn On the Bluetooth Headphones:
1. The power switch is located below the volume
control, press the power switch upwards
2. The headphones will state “power on” when
the headphones are turned on
To Turn Off the Bluetooth Headphones:
1. Press the power switch downwards. The
power switch is located below the volume
control
2. The headphones will state “power off” when
the headphones are turned off
Pairing to a mobile device
Activate headphone pairing mode:
1. While the Bluetooth Headphones are on, press
and hold the button for 5 seconds
2. The Bluetooth Headphones will then enter
pairing mode and the LEDs on the bottom will
flash red and blue
3. The Bluetooth Headphones will then give an
audio cue of “pairing”
NOTE: On first use the headphones will
automatically enter pairing mode.
Operation
