15
1300 886 649
Model: ATV60UHD-0918 Product Code:
63014
09/2018
www.tempo.org
AUS
Installation
Attaching the stand
Step 1
Place a soft cushioned material
on top of a flat surface to prevent
damaging the screen panel. Then
place the TV screen flat on top,
with the screen side facing down,
as illustrated on the right (1).
Step 2
Note the ‘L’ and ‘R’ markings on
the stand. Match them to the ‘L’
and ‘R’ installation points on the
underside of the TV. Align the
stand leg to its installation point,
as illustrated on the right (2).
Step 3
Tighten the screws (supplied) with
a screwdriver to affix the stand
to the panel, as illustrated on the
right (3).
CAUTION!
Do not apply excessive force as
this may damage the screw holes.
• Make sure the TV set is unplugged from the power supply before
installing or removing the stand.
• The TV panel may be awkward to install on your own. We recommend
you ask someone to help with installation and/or removal of the stand.
•
WARNING:
Do not place the TV standing upright without its stand legs
attached, as this may damage the infra-red remote sensor at the bottom
of the TV.
Your TV is packaged with the stand and the cabinet separated. Before using
the TV, install the stand as described below, or if you want to mount it to a
wall, see the next page for mounting advice (wall mount itself is not supplied).
