16
1300 886 649
Model: ATV40FHD-0118 Product Code: 60668 12/2017
www.tempo.org
AUS
Basic Operations
Selecting an Input Source
• Press the
SOURCE
button at the right lower side of the back panel, or on the
remote control, to display the input source list.
• Press the
/
buttons to select the desired input source, and then press
OK
to confirm your selection from the following options: DTV, ATV, AV, YPbPr,
HDMI 1/2/3, PC, USB.
NOTE:
When you switch on this TV for the first time, you need to select the
language and the country to auto-search for all the DTV programs in
your area. See opposite for instructions.
Channel Selection
• Press the
CH+/-
button to select the next/previous channel.
• Alternatively, press the number buttons to select a channel directly (press the
-/--
button repeatedly to select the first or second digit).
Volume Control
• Press the
VOL+/-
button to adjust the volume level.
• Press the
MUTE
button to mute the sound, press it again to restore sound.
Picture and Sound Mode
• Press the
P-MODE
button on the remote control repeatedly to select the
picture mode directly (available options: Standard, Mild, Personal, Dynamic).
• Press the
S-MODE
button on remote control repeatedly to select the sound
mode directly (available options: Standard, Music, Personal, Movie).
Sleep Time Setting
• Press the
SLEEP
button on the remote control repeatedly to select the
desired sleep time directly (available options: Off, 5min, 15min, 30min, 60min,
90min, 120min, 240min).
Video and Audio Settings
• Press the
ASPECT
button repeatedly to select the desired video size directly
from the following options: Auto, 4:3, Just scan, 16:10, Zoom1, Zoom2.
(Available sizes may vary for different input sources.)
NOTE:
If there is no signal, pressing this button will be ineffective and the
available video size may be different for different input sources.
• Press the
AUDIO
button repeatedly to select the desired audio language.
NOTE:
The channel you are watching must support multi-audio languages.
Information Display
• Press the
DISPLAY
button to display information about the current program.
