background image

3

1300 886 649

Model: ATV40FHD-0118 Product Code: 60668 12/2017

www.tempo.org

AUS

• 

Disconnect:

 Where the mains plug or an appliance coupler is used as the 

disconnect device, the disconnect device shall remain readily operable.

•   

Power plug: 

Make sure the plug is properly installed before inserting it fully into the 

outlet. A loose or improperly inserted power plug may cause a fire. 

•   

Protect the cord: 

Do not bend, twist or kink the power cord excessively. Do not 

allow anything to rest on or roll over the power cord and antenna cable. Doing 
so may cause a fire or an electric shock. Do not run the power cord near heat-
producing appliances such as radiators, stoves or irons. The excessive heat could 
melt the insulation and expose live wires, resulting in fire or electric shock. 

•   

Disconnect: 

Always grasp the plug when disconnecting the power cord. Pulling the 

cord can damage the internal wire and may cause a fire.

•   

Lightning storms: 

Unplug this TV during lightning storms or when unused for long 

periods of time. Not doing so may result in fire or electric shock.

Usage Conditions and Restrictions

•   

Adjustments: 

Follow the instructions in this manual when installing and adjusting 

the TV set. Only adjust those controls that are covered in this manual, as improper 
adjustment of other controls may result in damage. If this happens, unplug the TV 
set and have it serviced by appropriately qualified personnel, or phone the after 
sales support line for advice.

•   

Ventilation: 

Do not cover the ventilation openings with items such as newspapers, 

tablecloths, curtains etc. as this could impede ventilation.

•   

Cabinet slots: 

Do not insert objects of any kind into this unit through the cabinet 

slots, as they could touch the current-carrying parts or short-circuit parts, resulting 
in fire, electric shock or damage to the unit.

•   

Smoke or odour: 

If you notice any unusual odours or smoke around the unit, 

immediately disconnect the unit from the outlet and contact the service centre. 
Failure to do so may result in fire or electric shock.

•   

When not in use: 

When not using the unit for long periods of time, disconnect the 

power cord fromww the wall outlet. Dust could accumulate over time on the unit 
and cause it to generate heat and ignite, or deteriorate insulation, which in turn may 
result in an electrical fire.

• 

Moving: 

When moving the unit, be sure to turn it off and unplug it from the wall 

outlet. Moving the unit with the power cord connected to the outlet may cause 
damage to the cord, resulting in fire or electric shock.

General Safety Instructions (Cont.)

Summary of Contents for ATV40FHD-0118





















































Reviews: