10
After Sales Support
Telephone
:
1300 886 649
Controls and Connections (Cont.)
Using the Remote Control
1. To use the remote control, point it towards the front of the HD PVR.
2. The remote control has a range of up to 7 metres from the HD PVR at an angle of
up to 60 degrees.
3. The remote control will not operate if its path is blocked.
NOTE:
•
If the HD PVR does not operate when operating the remote control from a close
range, you need to replace the batteries.
•
Do not drop the remote control unit; do not subject it to physical shocks.
•
Keep the remote control unit dry; wetting it may cause the unit to malfunction.
•
Bright sunlight or lightning may cause the remote control to operate erratically.
•
Depleted batteries will decrease the remote control sensitivity.
•
Replace the batteries with new ones when operation of the unit deteriorates.
Installing Batteries
Remove the battery cover from the remote control unit and put two 1.5V,
AAA size batteries inside the compartment, following the +/- marking in the
battery compartment.
Precautions when using batteries
•
Do not use old and new batteries together.
•
Do not use different types of battery (for example, Manganese and Alkaline
batteries) together.
•
Note that there are chargeable and nonchargeable batteries. Do not attempt to
charge nonchargeable batteries.
• Always remove the batteries from the remote control unit and store the unit in a
dry place if you do not intend to use the remote control for more than a month.
•
CAUTION: Danger of explosion!
Make sure to insert the batteries correctly and
use only suitable batteries of the same type.
