G 120 II V
Page 76
1st Edition, Rev. 0 Chg. 2
wiring and connectors for attachment to wire harnesses. The panel is built to match the horsepower,
voltage, phase and frequency of the customer’s requirements.
6.2.1
Wiring Diagram
The wiring diagram for your specific Compressor Unit is stored inside the Electrical Panel. If a wiring
diagram for your machine is not found inside the Electrical Panel, then please call Bauer Compressors
Product Support Group for a replacement. Please have the serial number of the compressor available; it
is written on a label (See Figure 6-2) inside the Electrical Panel door.
6.2.2
Electrical Panel Interior Access
The interior of the Electrical Panel is accessed by using a coin or screwdriver to turn the latch on the
front of the Electrical Panel.
6.2.3
Optional Equipment
Optional equipment which may also be housed in the Electrical Panel is any of five Communication
Modules. An EEPROM Memory Module may also be an option in the Electrical Panel.
6.3
AC Power Requirements
The Electrical Panel must be supplied with electricity of the correct voltage, phase, and frequency to
ensure proper operation. Wiring and conduit selection must be in accordance with all national, state and
local codes. The customer is responsible for providing a means of disconnection from the power source
and protection from instantaneous short circuit. The Electrical Panel voltage and phase are displayed on
the exterior of the Electrical Panel as well as being written on a label (See Figure 6-2) on the inside of
the Electrical Panel door. In this example shown, the panel is wired for 230 volt, single phase, serial
number 100210.
Figure 6-2
Electrical Panel Label
MFG DATE:
UL File No. E141433
MAXIMUM RATING (AC3)
MODEL:
SERIAL:
BLOCK:
230V
1 Ph 60 Hz
46 FLA
10 HP
Norfolk, VA 23502 USA
757-855-6006 www.bauercomp.com
PANEL:
Short Circuit Current:
CONTROL FUSE LEGEND
3FU
ATQR -
TRM -
1FU
2FU
ATQR -
Use 600 VAC and 60 Degree Celsius
Copper Wire Only
Ground
Line
Terminal
Wire Range
awg 10-3
45 in-lb
Torque
awg 14-2
35 in-lb
KA
VE-13-E1/230V
100210
P0
8
0
8
762/06
2/2009
ASY-105
8
2A
3A
3A
xx,xxx
