Page 10
For technical questions, please call 1-888-866-5797.
Item 58162
S
AFET
y
Op
ERA
TION
M
AINTENAN
c
E
S
ETU
p
Operating Instructions
Read the ENTIRE IMpORTANT SAFETy INFORMATION section
at the beginning of this manual including all text under
subheadings therein before set up or use of this product.
Tool Set Up
TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION:
Turn the power Switch of the tool off, wait for the motor to stop,
before adjusting tool or installing accessories.
TO pREVENT SERIOUS INJURy FROM AccESSORy FAILURE:
Only use accessories that are rated at or above the RpM rating of the cordless Rotary Tool.
charging
NOTE:
Before using tool for the first
time, fully charge the Battery.
1. Use only included Charger. Use of
other chargers may cause battery
failure including explosion.
2. Plug charger’s jack into charging port.
charging
port
Battery
Indicator
3. Plug Adaptor into a grounded 120VAC outlet.
4. During recharging, the tool will become
slightly warm to the touch. This is normal
and not a cause for concern.
5. Battery indicator shows charging when
LEDs flash. When charging is done lights
will stay on. Unplug charging cable.
NOTIcE:
Do not leave the Battery in a
discharged state. Charge the Battery every 3
months if the tool is not in use. This will keep the
Battery from wearing down and add to its life. Do
not charge the tool at temperatures below 40° F.
