Page 13
For technical questions, please call 1-888-866-5797.
Item 63632
S
AFET
y
Op
ERA
TION
M
AINTENAN
c
E
S
ETU
p
Installing a Threaded Accessory
TO pREVENT INJURy: Wear heavy-duty work gloves when handling wire wheels and brushes.
These accessories are sharp and can cause injury.
1. The accessory MUST be:
• rated to at least 7000 RPM.
• no larger than 4-1/2" (115 mm) in diameter.
• fitted with a threaded opening of 5/8" x 11 TPI.
• undamaged.
• a sanding disc and backing pad, or
a sanding flap disc; a wire wheel, or
a wire cup brush; (accessories not included).
2. Press in and hold the Spindle Lock Button
to prevent the Spindle from turning.
3. Remove the Outer Flange and the
Inner Flange and keep in a safe place.
4. Thread disc accessory firmly onto the Spindle.
Wrench tighten onto the spindle.
Battery charging
Charge battery before using this tool. Follow instructions included with battery charger.
Workpiece and Work Area Set Up
1. Designate a work area that is clean and well-lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
2. Secure loose workpieces using a vise or clamps
(not included) to prevent movement while working.
3. There must not be hazardous objects, such
as utility lines or foreign objects, nearby
that will present a hazard while working.
4. You must use personal safety equipment including,
but not limited to, ANSI-approved eye and hearing
protection, as well as heavy-duty work gloves.
5. Before beginning work, provide for sparks
and debris that will fly off the work surface.
