Page 4
For technical questions, please call 1-888-866-5797.
Item 63433
S
AFET
y
Op
ERA
TION
M
AINTENAN
c
E
S
ETU
p
5.
Maintain power tools. check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use.
Many accidents
DUHFDXVHGE\SRRUO\PDLQWDLQHGSRZHUWRROV
6.
Keep cutting tools sharp and clean.
3URSHUO\
PDLQWDLQHGFXWWLQJWRROVZLWKVKDUSFXWWLQJHGJHV
are less likely to bind and are easier to control.
7.
Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Use of the
SRZHUWRROIRURSHUDWLRQVGLIIHUHQWIURPWKRVH
intended could result in a hazardous situation.
Service
Have your power tool serviced by a qualified repair person using only identical replacement parts.
7KLVZLOOHQVXUHWKDWWKHVDIHW\RIWKHSRZHUWRROLVPDLQWDLQHG
Rotary Hammer Safety Warnings
1.
Wear ear protectors with rotary hammers.
([SRVXUHWRQRLVHFDQFDXVHKHDULQJORVV
2.
Use auxiliary handle(s), if supplied with the tool.
/RVVRIFRQWUROFDQFDXVHSHUVRQDOLQMXU\
3.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord.
&XWWLQJDFFHVVRU\FRQWDFWLQJDƎOLYHƎZLUH
PD\PDNHH[SRVHGPHWDOSDUWVRIWKHSRZHUWRRO
ƎOLYHƎDQGFRXOGJLYHWKHRSHUDWRUDQHOHFWULFVKRFN
4. Let bit cool before touching, changing
or adjusting it. Bits heat up dramatically
while in use, and can burn you.
5. If the drill bit jams, release the Trigger immediately;
drill torque can cause injury or break bit.
6. Maintain labels and nameplates on the tool.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
7. Avoid unintentional starting.
Prepare to begin work before turning on the tool.
8. Do not lay the tool down until it has come to
a complete stop. Moving parts can grab the
surface and pull the tool out of your control.
9. When using a handheld power tool,
maintain a firm grip on the tool with both
hands to resist starting torque.
10. Do not leave the tool unattended when it is plugged
into an electrical outlet. Turn off the tool, and
unplug it from its electrical outlet before leaving.
11. This product is not a toy.
Keep it out of reach of children.
12. WARNING: This product contains di (2-ethylhexyl)
phthalate (DEHP), a chemical known to the State
of California to cause cancer and birth defects
or other reproductive harm. (California Health
& Safety Code § 25249.5,
et seq.
)
13. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
In addition, people with pacemakers should:
• Avoid operating alone.
• Do not use with Trigger locked on.
• Properly maintain and inspect to avoid
electrical shock.
• Properly ground power cord. Ground Fault Circuit
Interrupter (GFCI) should also be implemented
– it prevents sustained electrical shock.
14. WARNING: Some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities, contains chemicals known to the State
of California to cause cancer and birth defects or
other reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and cement or other
masonry products
• Arsenic and chromium from chemically
treated lumber
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
(California Health & Safety Code § 25249.5,
et seq.
)
15. WARNING: The cord of this product contains
lead and/or di (2-ethylhexyl) phthalate (DEHP),
chemicals known to the State of California
to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling.
(California Health & Safety Code § 25249.5,
et seq.
)
