manualshive.com logo in svg

Bauer 1621e-b, Owner'S Manual

Share
Download
Bauer 1621e-b Owner'S Manual Download Page 12

Page 12

For technical questions, please call 1-888-866-5797.

Item 63445 

        

S

AFET

y

Op
ERA

TION

M

AINTENAN

c

E

S

ETU

p

Record product’s Serial Number Here: 
Note:

 If product has no serial number, record month and year of purchase instead.

Note:

 Some parts are listed and shown for illustration purposes only, 

and are not available individually as replacement parts.

Internal Maintenance 

1.  Using allen wrench (not included), 

remove Hex Screws on Side Cover.

2.  Remove Rubber Handle, Side Cover and Rods.

Hex 

Screw

Side 

cover

Hex 

Screw

Rubber 

Handle

Rods

Lubrication

1. 

Elevation Screws and columns

a.  Remove both Side Covers.
b.  Clean Elevation Screws and Columns.
c.  Lubricate with a light coating of 

multipurpose grease (sold separately). 

2. 

Roller chains

a.  Remove left Side Cover.
b.  Use chain cleaner (sold separately) 

according to manufacturers instructions.

c.  Lubricate with chain oil (sold separately), 

wipe off excess oil. 

Replacing V-Belt

1.  Remove right Side Cover.

2.  Remove Belt Cover.

Belt 

cover

Figure K

3.  Move Belt back and forth on pulleys, while pulling 

Belt away from pulleys, one groove at a time.

4.  Put new Belt on upper pulley, then move 

Belt back and forth onto lower pulley, while 
pushing it onto pulley, one groove at a time.

5.  Replace Belt Cover, Rods, Right 

Panel and Rubber Handle.

6.  Replace Hex Screws.  

Summary of Contents for 1621e-b

















Reviews:

No comments

Brands by name

Popular brands

Load more brands