Page 10
For technical questions, please call 1-888-866-5797.
Item 63445
S
AFET
y
Op
ERA
TION
M
AINTENAN
c
E
S
ETU
p
Replacing Blades
1. Turn Planer off and unplug from its electrical outlet.
2. Using included Wrench, loosen Hex Screws on Dust Chute, then Remove
two Hex Screws on Blade Guard. Remove Blade Guard.
Wrench
Blade
Guard
Magnets
Hex
Screw
Hex
Screw
Figure H
cAUTION!
Blades are very sharp and are double-edged! Wear heavy-duty
leather work gloves at all times when handling a blade.
3. Wearing gloves, rotate Cutterhead toward you until it locks into place.
4. Remove six Hex Screws on Gib, then using Magnets
(see Figure H)
, remove Gib.
Hex
Screws
cutterhead
Release
Switch
Gib
Figure I
cAUTION!
Change both Blades at the same time. Changing
Blades individually could result in imbalance.
5. Using Magnets, remove Blade, rotate or replace, placing holes over Tabs.
Tab
Tab
Blade
Figure J
6. Replace Gib and six Hex Screws,
tighten Screws securely.
7. Push Cutterhead Release Switch
(see Figure I)
forward to allow
rotation to the second Blade. Repeat steps 4 through 6.
8. Replace Blade Guard and two Hex Screws, then tighten Dust Chute.
