2
STEP 1
Connection of ADSL2+ Modem Router
If you have an
ISDN telephone line
connect the modem router as shown
below:
1.
Connect one end of the RJ-45 Ethernet Cable to your PC’s Ethernet port
and the other end to one of the 4
"LAN"
ports of the Wireless ADSL
MODEM ROUTER.
2.
Connect the supplied RJ11 telephone cable from your office's telephone
jack to the
"LINE "
port of the supplied ATF057 splitter. Connect another
RJ11 telephone cable to the
"MODEM"
port of the splitter and connect the
other end of this cable to the
"LINE"
port of your WLAN ADSL2+ Router.
3.
Connect a RJ11 telephone cable to the
"PHONE"
port of the splitter and
connect the other end to the input which is underneath the NETMOD/NT1
OTE unit.
4.
Connect the power adapter to the power inlet
"POWER"
of the ADSL2+
WiFi Router and turn the
"ON/OFF SWITCH"
to switch of your ADSL2+
WiFi Router on and wait for 2 minutes before moving to the next step.
