32PCM voice multiplexer user manual
15
SNMP card software upgrade
The SNMP card software is stored in the FLASH. Software upgrade means FLASH
programming by SNMP card software upgrade function.
It needs software upgrade based on the 2 following situation. One is software upgraded,
which means replace the old software in terminal server by new; the other is when the
FLASH code destroyed, it could write new with the same version.
The update is realized by IE browser and the operation is easy.
Open “system firmware update” in the “system update” menu of the IE page, showing as
follows:
Click “browse”, select update document, then click “update”. Wait for some minute when
update( updating time is according to the size of the document). When presenting
“complete”, reboot the device to make it into effect.
Note:
1. If the update failed, the device will be destroyed abidingly. Please do it by the
factory or under the guidance of technician.
2. Do not browse through net page during updating. Furthermore, the system will not
work normally during update.
0214 30*Pots Fiber MUX SNMP Operate
Node
Select new node button
in Topology View management Toolbar, to get following
dialog and enter the node information.
