21
GB
Battipav srl
MAINTENANCE
CAUTION
BEFORE PERFORMING ANY OPERATION OR
ADJUSTMENT, DISCONNECT THE MACHINE FROM
THE SUPPLY MAINS.
CLEANING
Remove the cutting residues regularly from the water
recovery basin.
DISPOSAL
When parts wear out or when the machine is finally
scrapped, waste disposal must be carried out in
compliance with the laws in force.
Electric Motor
Aluminium
AL
Steel
AC
Copper
CU
Polyamide
PA
Main Body
Steel
AC
Polystyrene
PST
Polyamide
PA
W.E.E.E. IT08020000002803
The European Directive 2002/96/CE
arranges that in the event of scrapping
of electrical equipment, they must not
be disposed of city solid refusals but collected
separately, in order to optimize the level of recovery
and recycling of the materials and above all in order
to prevent damages to health and environment.
To comply with European Directive 2002/96/CE, all
electrical equipments must be marked with crossed
basket symbol.
The packing of the machine will be disposed of in
accordance with the methods laid down by current
legislation. For further information concerning
disposal of electrical equipment, please refer to
public administration service.
TROUBLESHOOTING
HAVE YOUR TOOL REPAIRED BY A QUALIFIED PERSON
This electric tool complies with the relevant safety rules. Repairs should only be carried out by
qualified persons using original spare parts, otherwise this may result in considerable danger to the
user.
Fault
Cause
Remedy
The machine does not function.
The power supply cable is damaged
or not properly connected.
Press the plug firmly into the power
socket.
No voltage in the 230 V socket.
Have the 230 V socket checked.
Switch is damaged.
Consult local dealer.
Motor is under powered and gives off
unpleasant odour.
Consult local dealer.
Machine is difficult to start.
Diamond blade is bent due to improper
use.
Consult local dealer.
Start capacitor is damaged.
Consult local dealer.
Motor bearings are damaged.
Consult local dealer.