Instruction Manual
for WPT, KTS, KPS, KTM, WSM series use and maintenance
pag. 64
10.5 - GEARS REPLACEMENT (M-MA, K-KA VERSIONS)
1. Unscrew the screws of the gearbox cover;
2. Use two screws to screw into the threaded extraction holes until the cover is removed;
3. Take out the gear with splined shaft using an extractor if necessary;
4. For the pinion: unscrew the self-locking nut, use an extractor or a press.
10.6 - TECHNICAL SUPPORT
Contact Battioni Pagani
®
authorized distributors for technical assistance or accessories and spare parts supply.
10.7 - REGULAR SERVICING
SERVICING TO BE CARRIED OUT
HOW TO PROCEED
FREQUENCY
Check oil circulation
View the control lights
Once a day
Check / clean the filter cartridge
• Open the filter cover on the collector through the 4
eyebolts;
• remove the cartridge;
• clean with water and / or compressed air preventing the
dirt from falling inside the collector
• move the plate to verify proper operation
• reassemble all parts
Once a week
Check oil level in tank
Use the oil level outside the tank
Once a week
Check that the over-pressure and vacuum
regulator valves are working correctly
Remove valves
Once a month
Check that the overflow valves are working
correctly
Remove valves
Once a month
Lubricate power take-off
(M - MA - K - KA - D)
Oil Power take-off with brush and lubricating oil
Once a month
Wash and clean the valves
Remove valves
Once a month
Check wear of blades
Remove threaded plug
Every 300 working hours
Wash oil tank
Remove tank
Once a year
Wash body internally
Cleaning with “Flushing Kit”, enter “Flushing Fluid” (after
washing only lubricate) and dispose of the products and
the cleaning residues adhered to the rules laid down for oil
chemicals
Whenever sewage enters or
when inactive for a long time
Wash lubrication pump
Use a brush and compressed air
Once a year or for prolonged
inactivity
