BatteryMINDer
®
Aviation-Adjusted Models 24041-AA-S2, S3 & S5
Rev. B-062613
Page 9
P/N VDC24041-AA-Sx-MNL
SIMPLIFIED OPERATING INSTRUCTIONS
Read and thoroughly understand ALL SAFETY Instructions, pages
3 - 7 including
Preparing to Charge
,
DC Connection Precautions
,
Unit Location
and
Qualifying Your Battery
BEFORE proceeding
further.
1.
Attach a battery connector assembly, either Ring Terminal Assembly
(
7
) or Battery Clips (
8
) (both supplied), to output cordset of charger
(
4
). NEVER CONNECT BOTH at the same time.
2.
Attach output to battery terminals:
RED band = Positive
+
BLACK band = Negative -.
3.
Ambient Temperature Sensor,
ATS-1 (
10
), comes already installed
on the Temperature Sensor input connector (
3
). Do not detach.
Either the
Ambient Temperature Sensor (ATS-1) or the At-the-
Battery Temperature Sensor (ABS-248)
(
11
)
is mandatory when
used with all Aviation batteries.
4.
Plug AC power cord (
5
) into a 120 Vac electrical outlet.
5.
Observe Reversed Polarity
GREEN/RED LED indicator (
1a
):
If lit RED, reverse battery connector attachments on battery.
6.
Observe
Charging - Maintenance/Desulfating GREEN
LED
indicator (
1c
)
:
Solid =
charging
Blinking =
maintaining battery(s)
.
Charger will automatically start within 30 seconds or less.
7.
Observe
Battery Connected - Error LED Indicator (
1a
):
Must be lit
GREEN
1
.
Be sure Maintaining - Desulfating LED (
1c
)
is BLINKING before leaving
unit for an extended period of time. Otherwise, press & hold the
Maintenance button (
2
) for 3 seconds.
IF IN DOUBT REGARDING ANY OF THE ABOVE, REFER TO
Detailed
Operating Instructions.
1
See full instructions if not lit
GREEN.
