11
by
Installation - Himalayan Salt Panel (WIFI (Phase 1))
Installation - Himalayan Salt Panel (WIFI (Phase 1))
1. Determine the desired locations
for the following: Power Supply
(G), WIFI Receiver (F), and Salt
Panel Assembly (A).
Note:
WIFI
Receiver (F) and Power Supply
(G) must be in an accessible,
dry location. Provided cord
lengths are 50’ maximum.
Note:
Himalayan Salt Panel Assembly
(A) can be recessed or surface
mounted.
2. Install electrical boxes for the
following: Power Supply (G),
WIFI Receiver (F), and Salt
Panel Assembly (A).
3. Run a 120VAC externally
switched GFCI outlet to power
electrical box supplying power
to Power Supply (G).
4. Mount WIFI Bracket to wall and
place WIFI Receiver (F) into
Bracket.
5. Route Light Extension Cable (E)
from WIFI Receiver (F) to Salt
Panel Assembly (A).
6. Connect the Light Extension
Cable (E) to WIFI Receiver (F),
Red-Red, Green-Green, Blue-
Blue, Black-Black.
7. Connect the WIFI Receiver (F)
to the main power cable from
Power Supply (G).
V+
V+
R
R
G
G
B
B
WIFI Receiver
Light Extension
Cable
Wir
e Nut
F
E
